Bore Tech Decimator Suppressor Cleaning System

With this Bore Tech Decimator Cleaning System cleaning kit, it's easy to clean suppressors, as well as muzzle brakes, flash hiders, and QD mounting systems. The included liquids thoroughly remove both carbon and lead fouling, and copper residue.

The Bore Tech Decimator Cleaning System cleaning kit consists of the following components:

Stainless steel suppressor holder
In this liquid bath, a suppressor can be securely held upright to be filled with cleaning fluid. Smaller parts can also be soaked loosely in the holder.

Sealing caps
To keep the cleaning fluid inside the suppressor, four silicone plugs are included, suitable for various calibers. These can be used to seal the bottom end of the suppressor.

Bore Tech Decimator fluid A
This fluid dissolves carbon deposits and lead fouling. The solution should soak for 12-24 hours, after which the component can be rinsed clean. The fluid is safe for use on aluminum, stainless steel, titanium, and most alloys and coatings. It is non-flammable, odorless, biodegradable, and ammonia-free.

Bore Tech Decimator fluid B
This fluid dissolves copper residues. The solution should soak for 12-24 hours, after which the component can be rinsed clean. The fluid is safe for use on aluminum, stainless steel, titanium, and most alloys and coatings. It is non-flammable, odorless, biodegradable, and ammonia-free.

Spray lance
The spray lance is a convenient tool for thoroughly rinsing the suppressor after cleaning. It consists of a handle with a trigger that can be connected to a high-pressure washer. The lance itself can be inserted into the handle using a quick connector. An anti-splash plate is slid over the lance with a spring, so it stays pressed against the suppressor when the lance is retracted.

---

Specifications

Brand	Bore Tech
Product code	BTSC-1000-00